Degrees or radians? Why sin(30) can give the wrong answer
sin(30) is 0.5 in degrees and about −0.988 in radians. Here is how to tell which mode you need and how to convert between them.
You type sin(30), expect 0.5, and get −0.98803…. The calculator is not broken. It is reading 30 as 30 radians, not 30 degrees. This is the most common calculator mistake in trigonometry, and it is easy to avoid once you know what to check.
Two ways to measure an angle
A full turn is 360 degrees, or 2π radians. One radian is the angle that cuts off an arc as long as the circle's radius, about 57.3°.
So 30° = π/6 ≈ 0.5236 rad, and 90° = π/2 ≈ 1.5708 rad.
Which mode should you use?
- Degrees: triangles, bearings, slopes and most geometry homework, wherever the problem writes angles with the ° symbol.
- Radians: calculus, physics formulas such as angular velocity, and any problem that writes angles with π. The derivative of sin(x) is cos(x) only when x is measured in radians.
A quick sanity check
Before trusting a trig result, try a value you know: sin(90) should be 1 in degree mode. If you get 0.894, you are in radians. In radian mode, sin(π/2) should be 1.
Inverse functions follow the mode too
sin⁻¹(0.5) returns 30 in degree mode and 0.5236 in radian mode. Both are correct; they are the same angle in different units. Write down the unit with your answer so the next step uses it consistently.
Calculator → degree/radian switch
- Check the angle mode shown in the calculator before you start.
- Switch to degrees for triangle and geometry problems, radians for calculus.
- Type sin(30) in each mode to see the difference for yourself.